Jensen XA2125 - Specifications

12
XA2125, XA275, XA250
®
Specifications
XA Series 2-Channel Amplifiers
Frequency Response ....................................................................................... 20 Hz-20 kHz ± 0.5 dB
Signal to Noise Ratio @ Rated Power ....................................................................................>100 dB
Channel Separation @ Ref. Power ............................................................................... >65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms ...................................................................................... <0.8%
Speaker Impedance .............................................................................................................. 2-8 ohms
Input Impedance ............................................................................................................... 47 k ohms
Bass Boost Center Frequency ..................................................................................................... 45Hz
Crossover .................................................................................................... 12 dB/octave, Butterworth
Power Requirement ...................................................................14.4 VDC (10.8-15.6 VDC allowable)
XA2125
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) ...................................................................... 125 Watts per channel RMS, < 0.5% THD
(2 ohms) ...................................................................... 175 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ......................................................... 350 Watts per channel RMS, < 0.8% THD
Dimensions ................................................................ 3" x 11.125" x 10" (76mm x 283mm x 254mm)
XA275
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms ......................................................................... 75 Watts per channel RMS, < 0.5% THD
(2 ohms) ...................................................................... 100 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ......................................................... 200 Watts per channel RMS, < 0.8% THD
Dimensions ........................................................... 3" x 11.125" x 8.375" (76mm x 283mm x 213mm)
XA250
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) ........................................................................ 50 Watts per channel RMS, < 0.5% THD
(2 ohms) ........................................................................ 75 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ......................................................... 150 Watts per channel RMS, < 0.8% THD
Dimensions ........................................................... 3" x 11.125" x 8.375" (76mm x 283mm x 213mm)
Specifications subject to change without notice.
6236 XA2CH_E.p65 5/7/01, 2:07 PM12