Jerr-Dan MPL-NG - 3.2 Wired Hand Controller

Section 3 - Controls & Indicators
3-2 5376000253
3.2 10 FUNCTION WIRED HAND CONTROLLER
(IF EQUIPPED)
2
4
3
5
6
1
1. Power/Function Indicator : “Red” - Power On/”Green” - Function
Operated
2. Underlift Boom - Up/Down : Controls the underlift boom raise/
lower functions.
3. Hydraulic Grid - Open/Close : Controls the hydraulic grid open/close
functions.
4. Underlift Boom Tilt - Up/Down : Controls the underlift boom tilt raise/
lower functions.
5. Underlift Boom - Out/In : Controls the underlift boom extend/
retract functions.
6. Winch - In/Out : Controls the wire rope winding/
unwinding functions of the (Single)
winch.