Table of Contents
5376000253 i
TABLE OF CONTENTS
Revision Log
Read This First
Operator Qualications b
Modications b
Hazard Classication System c
Safety Alert System and Safety Signal Words c
Reporting Safety Defects e
Table of Contents
Section 1 - General Safety Practices
1.1 General 1-1
1.2 Pre-Operation 1-2
Operator Training and Knowledge 1-2
Electrical Hazards 1-2
Crush and Collision Hazards 1-4
Winch Cable / Falling Load Hazards 1-4
Uncontrolled Towed Load Hazards 1-6
Tip-Over Hazards 1-6
Fall Hazards 1-7
Chemical Hazards 1-7
Battery Hazards 1-8
Personal Protective Equipment 1-8
Weather Conditions 1-9
Vehicle Equipment Damage 1-9
Section 2 - Pre-Operation And Inspection
2.1 Pre-Operation Check and Inspection 2-1
2.2 Decals 2-2
2.3 Walk-Around Inspection 2-4
2.4 Operational Checks 2-7
Operational Check 2-7
Section 3 - Controls & Indicators
3.1 General 3-1
3.2 10 Function Wired Hand Controller (If Equipped) 3-2
3.3 8 Function Wireless Hand Controller (If Equipped) 3-3
Section 4 - Operation
4.1 Underlift Operation - Hydraulic Grids 4-2
4.2 Tie-down Straps - Hydraulic Grids 4-7
4.3 Underlift Operation - Manual Grids 4 -11
4.4 Tie-Down Straps - Manual Grid 4-17
4.5 Towball Hitch Attachment 4-19
4.6 Motorcycle Towing Adapter Operation (Optional) 4-21
4.7 Gooseneck Towball Towing Adapter Operation (Optional) 4-27
4.8 Gooseneck Fifth Wheel Towing Adapter Operation (Optional) 4-28
To Next Page
Loading...
Need help?
General