Jerr-Dan MPL-NG - 4.5 Towball Hitch Attachment

To Next Page

To Previous Page

Section 4: Operation

5376000253 4-19

4.5 TOWBALL HITCH ATTACHMENT

The MPL-NG is supplied with a Towball Hitch attachment that will allow you

to recover and tow trailers requiring a tow ball hookup.

1. Remove the towball hitch

attachment from the toolbox.

2. Use the bottom set of holes,

install the towball hitch to the

bottom on the underlift boom

using the hitch pins.

3. Secure the hitch pins with the

linchpins.

4. Install the desired towball to the

towball hitch.

5. Position the ball coupler over

the ball and lock into place.

Make sure that the ball and

coupler are of the same

matched size.