Section 4: Operation
5376000253 4-25
14. Raise the underlift boom to the
desired towing height.
15. Tie the front of the motorcycle
to the rear of the wrecker body.
Attach the lasso style straps to
each of the handle bars.
16. Place the hook on one end of
the “front” strap to the loop of
the lasso strap on the handle
bars and place the hook on
the other end to the rear of the
wrecker body and tighten with
the ratchet. Repeat for the
other side.
17. Use the underlift safety chains
to prevent the wheel grid from
pivoting during travel. Loop the
end of the safety chain around
the grid and secure with the
grab hook. Remove the slack
in the chain and secure the
chain in the keyslot of the chain
box.
Care should be taken when
lifting the boom. Do not try
to level the underlift. The
straps may overtighten or
become loose.
To Next Page
Loading...
Need help?
General