Section II: Operation
Page 52
5-376-000086
REV. 4 - 07/10
12. Rotate the “CAM” handles on the
hold back bars 180° to the open
position.
13. Maneuver the sling under the
vehicle to be towed, far enough
under so the vehicle will ride on
the rubber belts.
14. Attach hook-up chains. The
chain J hooks must be secured
firmly around the axle or the frame
of the towed vehicle. When
fastening the J hook, be sure that
it is attached to the towed vehicle
in such a manner as to prevent
any damage to the brake lines or
other functional parts of the
vehicle.
To Next Page
Loading...