Need help?Do you have a question about the Jet JHBS916 and is the answer not in the manual?
Manual for the JET 9" x 16" 1-1/2 HP 4 Speed Belt Drive Bandsaw.
Steps for safely removing and installing the saw blade on the machine.
Procedures for safely starting and stopping the bandsaw operation.
Guidance on adjusting the saw blade for optimal tracking and cutting accuracy.
How to regulate the hydraulic feed rate for efficient cutting and blade life.
Instructions for setting the blade guide brackets close to the vise jaws.
Adjusting the micro switch for automatic shut-off after material is cut.
How to adjust the thrust roller for correct blade clearance.
Steps to adjust the guide roller eccentric bushings for blade snugness.
Procedures for positioning and adjusting the vise jaws for cutting.
Steps for preparing the bandsaw for cutting operations.
Instructions on how to change the four available speed settings on the machine.
Maintenance guide for draining and refilling the gear case oil.
Information on how to order replacement parts, including required details.
To Next Page
General
