7
Abrasive belt keeps tearing
*Belt is running the wrong direction-
observe arrow on the sanding belt.
Sanded edge not square
*Table not square to sanding disc-
Adjust positive stop for 90°.
Sanding marks on the wood
*Workpiece was held still-
keep workpiece moving.
*Wrong grit sanding belt-
use coarser grit for stock removal
and fine grit for finish sanding.
*Feed pressure too high-
never force the wood.
10. Available accessories
Stock number 708597
Closed cabinet stand on wheels.
Refer to the JET-Pricelist
for various grit sanding belts and
sanding discs.
To Next Page
Loading...
Need help?
General
