24
Trouble Probable Cause Remedy
E7 shown on digital
readout
Motor sensor not working Check connectors of motor sensor cord
to switch box
Readjust sensor closer to sensor collar
Replace sensor collar (p/n JWL1221VS-
254)
Replace sensor set (p/n JWL1221VS-
258)
Spindle locked Release index pin or spindle lock
E8 shown on digital
readout
Motor cord unplugged Make sure connector plug of motor cord
is connected
Circuit board burned out Replace circuit board
16.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-
800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the
Model Number and Serial Number of your machine available when you call will allow us to serve you quickly
and accurately.
To Next Page
Loading...
