Jet JWL-1236 - Lathe Specifications; Model and Technical Details; Machine Dimensions and Capacity; Headstock and Tailstock Features

6
Specifications
Model Number ......................................................................................................................................... JW L-1236
Stock Number ............................................................................................................................................. 708352
Motor .................................................................................. TEFC, 3/4HP, 1PH, 115V Only, 60Hz, 8A, 1720 RPM
Switch ....................................................................................................................................... manual pushbutton
Construction:
Headstock ............................................................................................................................................ cast iron
Tailstock ............................................................................................................................................... cast iron
Bed ....................................................................................................................................................... cast iron
Tool Rest .............................................................................................................................................. cast iron
Stand .......................................................................................................................................................... steel
Dimensions:
Swing Over Bed (in.) ...................................................................................................................................... 12
Swing Over Tool Rest Base (in.) ................................................................................................................ 8-3/4
Distance Between Centers, maximum (in.) .................................................................................................... 35
Outboard Turning (in.) ..................................................................................................................... up to 16-1/2
Overall Dimensions (LxWxH)(in.) ................................................................................................... 60 x 17 x 44
Stand Footprint (LxW)(in.) .......................................................................................................... 43-1/2 x 18-1/2
Distance Floor to Bed (in.) ....................................................................................................................... 34-1/2
Headstock:
Spindle Nose (in.) .................................................................................................................................. 1 x 8TPI
Hole through Spindle (in.) ............................................................................................................................. 3/8
Spindle Center to Floor (in.) ..................................................................................................................... 40-1/2
Spindle Taper ...................................................................................................................................... #2 Morse
Headstock Pivot (deg.) ................................................................................................................................. 360
Positive Stops (deg.) .......................................................................................................................... 45 and 90
Spindle Speeds (RPM) ........................................................................ (six): 550, 900, 1250, 1650, 2600, 3000
Drive Pulley System ............................................................................................................................... Reeves
Locking System ...........................................................................................................................cam (tool-less)
Tailstock:
Hole through Tailstock (in.) ........................................................................................................................... 3/8
Tailstock Taper .................................................................................................................................... #2 Morse
Ram Travel (in.) ......................................................................................................................................... 2-1/4
Locking System ...........................................................................................................................cam (tool-less)
Tool Rest:
Base Locking System ..................................................................................................................cam (tool-less)
Tool Rest Provided (in.) ................................................................................................................................... 6
Weight:
Net, approximate (lbs.) ......................................................................................................................... 172 Lbs.
Shipping, approximate (lbs.) ................................................................................................................ 190 Lbs.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior
notice, without incurring obligations.