Jet JWL-1440VS - 14.0 Recommended Lathe Speeds (per diameter of workpiece)

23
14.0 Recommended Lathe Speeds (per diameter of workpiece)
Diameter of Work Roughing RPM General Cutting RPM Finishing RPM
Under 2” 1520 3000 3000
2” to 4” 760 1600 2290
4” to 6” 510 1080 1500
6” to 8” 380 810 1125
8” to 10” 300 650 900
10” to 12” 255 540 750
12” to 14” 220 460 640
Table 4