Jet JWP-16OS - Product Features and Specifications; Technical Specifications

7
Features of the JWP-16OS Planer
Specifications
Model Number............................................................................................................................... JWP-16OS
Stock Number ..................................................................................................................................... 708531
Maximum Planing (W/in.) ............................................................................................................................ 16
Maximum Planing Thickness (T/in.).............................................................................................................. 6
Maximum Depth of Cut (in.) ..................................................................................................................... 3/16
Maximum Full Width Depth of Cut (in.) ...................................................................................................... 1/8
Maximum Opening (in.)................................................................................................................... 6-3/8 x 16
Minimum Planing Length (in.) ....................................................................................................................... 8
Knives............................................................................................................................................................ 3
Planer Blade Size (L x W x T/in.) ........................................................................................... 16-1/8 x 1 x 1/8
Cutterhead Speed (RPM)....................................................................................................................... 4,500
Cuts per Minute.................................................................................................................................... 13,500
Cutterhead Diameter (in.)........................................................................................................................2-7/8
Feed Rate (FPM) ................................................................................................................................16 & 20
Dust Port Diameter (in.) ................................................................................................................................ 4
Overall Dimensions (L x W x H/in.) ............................................................................................. 48 x 32 x 51
Motor ..................................................................................................................................... 3HP, 1Ph, 230V
Net Weight (approx. lbs.) .......................................................................................................................... 430
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, alterations to parts, fittings, and
accessory equipment deemed necessary for any reason whatsoever.