Jet JWP-208 - Product Features; Key Features Overview; Technical Specifications; Model JWP-208 Specifications

6
Features
Fig. 2
Specifications
Model No............................................................................ JWP-208-1........................................ JWP-208-3
Stock No................................................................................... 708528.............................................. 708584
Table Area (D x W/in.)........................................................ 25-3/4 x 20........................................25-3/4 x 20
Maximum Planing (W/in.) ................................................................. 20...................................................... 20
Maximum Planing (T/in.) .................................................................... 6........................................................ 6
Full Width Cutting Depth (in.)........................................................ 3/32................................................... 3/32
Minimum Planing Depth (in.)........................................................ 6-3/4..................................................6-3/4
Knives................................................................................................. 4........................................................ 4
Blade Size (L x W x T/in.)...................................................20 x 1 x 1/8....................................... 20 x 1 x 1/8
Cutterhead Speed (RPM)............................................................ 5,000................................................. 5,000
Cuts per Minute......................................................................... 20,000............................................... 20,000
Cutterhead Diameter (dia/in.)..................................................... 3-3/16................................................3-3/16
Feed Rate (FPM) .....................................................................24 & 31..............................................24 & 31
Dust Chute Diameter (dia/in.)............................................................. 5........................................................ 5
Overall Dimensions (L x W x H/in.) ...................... 26 x 36-5/8 x 41-3/8.......................... 26 x 36-5/8 x 41-3/8
Motor ....................................................................3HP, 1Ph,230V only......................... 5HP, 3Ph, 230/460V
................... (prewired 230V)
Overall Dimensions (L x W x H/in.) ...................... 26 x 36-5/8 x 41-3/8.......................... 26 x 36-5/8 x 41-3/8
Net Weight (approx. lbs.) ............................................................... 640.................................................... 640
The specifications in this manual are given as general information and are not binding. WMH Tool Group
reserves the right to effect, at any time and without prior notice, alterations to parts, fittings, and
accessory equipment deemed necessary for any reason whatsoever.