Jet ZH Series Operating Instructions

6
4.2 Noise emission
Acoustic pressure level (according to EN ISO 11202):
Idling at maximum speed LpA 82,4 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended
to allow the user to make a better estimation of the
hazards and risks involved only.
4.3 Content of delivery
GH-2040 / 2060 / 2080 ZH:
6 Leveling pads
Splash guard
Tool post guard
Chuck guard with limit switch
250mm 3-jaw universal chuck with basic and reversing
jaws
320mm 4-jaw independent chuck
400mm faceplate
Four way tool post with indexing function
Steady rest
Follow rest
Foot brake with limit switch
Coolant system
Halogen work light
MT-5 life centre
MT-5 fixed centre
MT-7/ MT-5 reduction sleeve
Threading dial
Stop shaft with 5 adjustable cams (switch off of
longitudinal feed)
Operating tools in tool box
Oil can
Operating manual
Spare parts list.
GH-2640 / 2660 / 2680 / 26120 ZH:
6 Leveling pads
Splash guard
Tool post guard
Chuck guard with limit switch
325mm 3-jaw universal chuck with basic and
reversing jaws
400mm 4-jaw independent chuck
630mm faceplate
250mm drive plate
Four way tool post with indexing function
Steady rest
Follow rest
Foot brake with limit switch
Coolant system
Halogen work light
MT-5 life centre
MT-5 fixed centre
MT-5/ Ø113mm reduction sleeve
Threading dial
Stop shaft with 5 adjustable cams (switch off of
longitudinal feed)
Operating tools in tool box
Oil can
Operating manual
Spare parts list.

Jet ZH Series Specifications

General

Brand	Jet
Model	ZH Series
Category	Lathe
Language	English