LIST OF ASCII COMMANDS
ExmapleParametersDescriptionCommand
Disable Options Changes
Enable Setpoint Presets
Disable Setpoint Presets
DIS
ENP
DIP
Command: DIS<CR>
Response: OK
Command: ENP <CR>
Response: OK
Command: DIP <CR>
Response: OK
CR at end
CR at end
CR at end
Get: RTT CR at end or ? CR at end
Set: RTT, HH:MM:SS
Get:
Command: RTC?<CR> or RTC<CR>
Response: HH:MM:SS MM/DD/YY
Set:
Command: RTC,12:34:56 10/20/15<CR> = Set
Real Time Clock to 12:34:56, October 20th, 2015
Response: OK
Get:
Command: RTT?<CR> or RTT <CR>
Response: HH:MM:SS
Set:
Command: RTT,12:34:56<CR> = Set Real Time
Clock to 12:34:56
Response: OK
Get:
Command: PRE,4?<CR> or PRE,4<CR>
Response: Setpoint Preset #4 Value
Set:
Command: PRE,2,50.0<CR> = Set Setpoint
Preset #2 to 50.0
Response: OK
Get: PRE,Y CR at end or ? CR at end
Y = setpoint number 1 through 8
Set: PRE,Y,X or PRE,Y,XXXXX
Get / Set Setpoint PresetPRE
RTC
Get / Set Real Time Clock
(Time and Date)
Get: RTC CR at end or ? CR at end
Set: RTC,HH:MM:SS MM/DD/YY
RTT
www.itorque.com13Jetco Torque Tools
Get / Set Real Time Clock
(Time only)
To Next Page