JETI model DUPLEX REX3 User Manual

COMPLEX RADIO CONTROL SYSTEM
2. Connect the USB adapter to the PC. In the lower right corner of
the JETI Studio screen, select the correct COM port. On the USB
adapter, the green LED (power) lights up and the red LED
(communication) starts flashing.
Duplex REX receivers can be updated
by the JETI USB adapter and the JETI
Studio program. JETI Studio is free to
download from the manufacturer's
website www.jetimodel.com
4. Connect the cable from the USB adapter to the receiver (Ext.
input).
5. Select the update version and confirm "Update".
3. In JETI Studio, select the "Tools/Device Update" item.
1. Install the JETI Studio program on the PC and start it.
Update procedure:
EN
6 Receiver update
USB adapter
Note: device updates are free and important. Your devices may
get new functions, higher performance and higher stability
through updates. Always make sure your device has the latest
software.
34

JETI model DUPLEX REX3 Specifications

General

Brand	JETI model
Model	DUPLEX REX3
Category	Control Systems
Language	English