Jetline 9600 Series User Manual

9629 Microprocessor Controller
- 27 -
Section VII.
Operational Sequence
Wire
Stop
Delay
Wire Stop Delay
times out
Wire Stop Delay = 0
Wire
Retract
Time
Wire drive motor
stops
DRIVE
MOTOR
Wire drive motor
reverses
Wire Retract Time = 0
Wire Retract Time
greater than 0
Wire drive motor
stops rotating
DRIVE
MOTOR
Wire Stop Delay
greater than 0
Wire
Start
Delay
Wire Start Delay
times out
Wire drive motor
starts rotating
Wire Start Delay = 0
Wire Start Delay
greater than 0
Loop
Sensing
Delay
Loop Sensing Delay
times out
Loop Sensing Delay = 0
Loop Sensing Delay OFF
Loop Sensing Delay ON
and greater than 0
Closed Loop
ON
DRIVE
MOTOR
Press START button
DRIVE
MOTOR
Wire Retract Time
times out
END OF
SEQUENCE
Remote Start/Stop
Signal
Press STOP button
On Off

Jetline 9600 Series Specifications

General

Brand	Jetline
Model	9600 Series
Category	Controller
Language	English