Jetline 9700W - Ramp Enable, Pulse Enable, Aux Names

Page 39
RAMP ENABLE
Ramp Enable is either yes or no. If yes, then Ramp Time is
displayed in the main screen.
PULSE ENABLE
Pulse Enable is either yes or no. If yes, them Pulsed is displayed
in the main screen.
AUX1 NAME
By pressing the right arrow you will be able to enter the name for
the AUX1 output. This is the name that will be shown in the name
menu and on the run screen. The name is limited to 4
alpha/numeric characters.
AUX2 NAME
By pressing the right arrow you will be able to enter the name for
the AUX2 output. This is the name that will be shown in the name
menu and on the run screen. The name is limited to 4
alpha/numeric characters.
AUX3 NAME
By pressing the right arrow you will be able to enter the name for
the AUX3 output. This is the name that will be shown in the name
menu and on the run screen. The name is limited to 4
alpha/numeric characters.
CONFIG
75
YES
YES
RAPID JOG
RAMP ENABLE
PULSE ENABLE
CONFIG
YES
YES
llu
RAMP ENABLE
PULSE ENABLE
AUX1 NAME
CONFIG
YES
llu
llu
PULSE ENABLE
AUX1 NAME
AUX2 NAME
CONFIG
llu
llu
llu
AUX1 NAME
AUX2 NAME
AUX3 NAME
CONFIG
llu
llu
llu
AUX2 NAME
AUX3 NAME
PASSWORD