IMPORTANT CHARGING NOTES:
· ONLY USE THE INCLUDED CHARGER OR ONE OBTAINED DIRECTLY THROUGH
JETSON LABELED WITH LS-018C20-3601800 OR THE PART SKU PJCORE-CH.
MADE BY DONGGUAN LI POWER ELECTRONICS CO., LTD.
· PLUG THE CHARGER INTO THE WALL OUTLET BEFORE PLUGGING INTO THE CHARGING
PORT ON THE BIKE.
· DO NOT USE RELOCATABLE POWER TAPS.
· NEVER TURN ON THE BIKE WHILE IT IS CHARGING.
· CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED—ABOUT 5 HOURS.
· NEVER LEAVE THE BIKE CHARGING OVERNIGHT OR FOR EXTENDED PERIODS OF TIME.
· DO NOT ATTEMPT TO DISASSEMBLE THE BATTERY.
· CHARGING AMBIENT TEMPERATURE RANGE: 32°F(0°C)-104°F(40°C)
· OPERATING AMBIENT TEMPERATURE RANGE: 14°F(-10°C)-104°F(40°C)
· DO NOT USE THIS PRODUCT IF THE FLEXIBLE POWER CORD OF OUTPUT CABLE IS
FRAYED, HAS BROKEN INSULATION, OR ANY OTHER SIGNS OF DAMAGES.
THIS IS THE MARKING YOUR
CHARGER WILL HAVE.
XX/XXXX
FAILURE TO USE CORRECT CHARGER CAN RESULT IN FIRE AND EXPLOSION.
To Next Page
Loading...
