3.5 Changing the Display
CHANGING THE SPEC DISPLAYED:
QUICK-PRESS THE POWER/MODE BUTTON TO TOGGLE THE DISPLAY BETWEEN THE ODOMETER, TRIP ODOMETER, AND TRIP TIME.
· ODOMETER ("ODO") - TOTAL DISTANCE TRAVELED ON THIS UNIT
· TRIP ODOMETER ("TRIP") - TOTAL DISTANCE TRAVELED DURING A SINGLE USE OF THE UNIT
NOTE: THE TRIP ODOMETER WILL RESET EVERY TIME THE SCOOTER IS POWERED OFF.
· TRIP TIME ("TRIP TIME") - TIME TRAVELED ON THIS RIDE
NOTE: THE TRIP ODOMETER AND TRIP TIME WILL RESET EVERY TIME THE SCOOTER IS POWERED OFF.
TO MANUALLY RESET THE TRIP THERMOMETER WHEN THE BIKE IS POWERED ON:
SIMULTANEOUSLY PRESS AND HOLD THE POWER/MODE AND DOWN () BUTTONS FOR 2 SECONDS.
To Next Page
Loading...
