TO MANUALLY RESET THE TRIP THERMOMETER WHEN THE BIKE IS POWERED ON: SIMULTANEOUSLY PRESS AND HOLD THE
POWER/MODE AND DOWN () BUTTONS FOR 2 SECONDS.
TO CHANGE THE BRIGHTNESS OF THE SCREEN:
1. SIMULTANEOUSLY PRESS AND HOLD THE UP () AND DOWN () BUTTONS FOR 2 SECONDS TO ENTER THE SETTINGS MENU.
2. QUICK-PRESS THE UP ARROW UNTIL “ST3” IS DISPLAYED ON THE SCREEN.
3. QUICK-PRESS POWER/MODE BUTTON.
4. QUICK-PRESS THE UP ( ) AND DOWN ( ) BUTTONS TO TOGGLE BETWEEN BL-1 (LOWEST BRIGHTNESS), BL-2 (MIDDLE
BRIGHTNESS) AND BL-3 (BRIGHTEST) UNTIL THE DESIRED SETTING IS REACHED.
5. QUICK-PRESS THE POWER/MODE BUTTON TO CONFIRM.
6. PRESS AND HOLD THE POWER/MODE BUTTON FOR 2-3 SECONDS TO EXIT THE SETTINGS MENU.
TO CHANGE THE UNIT OF MEASUREMENT FROM MILES TO KILOMETERS:
1. SIMULTANEOUSLY PRESS AND HOLD THE UP () AND DOWN () BUTTONS FOR 2 SECONDS TO ENTER THE SETTINGS MENU.
2. QUICK-PRESS THE UP ARROW UNTIL “ST4” IS DISPLAYED ON THE SCREEN.
3. QUICK-PRESS POWER/MODE BUTTON.
4. QUICK-PRESS THE UP () AND DOWN () BUTTONS TO TOGGLE BETWEEN KILOMETERS (KM) AND MILES UNTIL THE
DESIRED SETTING IS REACHED.
5. QUICK-PRESS THE POWER/MODE BUTTON TO CONFIRM.
6. PRESS AND HOLD THE POWER/MODE BUTTON FOR 2-3 SECONDS TO EXIT THE SETTINGS MENU.
To Next Page
Loading...
