TO REINSERT THE BATTERY:
1. WITH THE HANDLE ON THE LOWER HALF OF THE BATTERY FACE, SLOWLY PUSH THE BATTERY INTO THE BATTERY
COMPARTMENT. ENSURE THAT THE BACK OF THE BATTERY LINES UP WITH THE PLUGS AT THE BACK OF THE
BATTERY COMPARTMENT.
2. INSERT ONE KEY IN THE KEYHOLE AND FULLY TURN IT CLOCKWISE.
3. REMOVE THE KEY FROM THE KEY HOLE.
4. CHECK THAT THE BATTERY IS SECURE IN THE FRAME AND CANNOT BE PULLED OUT.
IMPORTANT: ALWAYS LOCK THE BATTERY INTO THE FRAME. DO NOT POWER ON THE BIKE OR RIDE IT WITHOUT THE
BATTERY LOCKED INTO PLACE.
IMPORTANT: TO AVOID DAMAGING THE BATTERY, DO NOT INSERT IT INTO THE FRAME TOO QUICKLY OR WITH
TOO MUCH FORCE.
To Next Page
Loading...
