USING THE RACKIT WITHOUT A COMPANION CARGO ACCESSORY:
1. PLACE YOUR CARGO ON THE RACK.
2. SLIP 1 HOOK OF A BUNGEE STRAP (NOT INCLUDED) INTO ONE BUNGEE ATTACHMENT LOOP ON THE RACK.
3. STRETCH THE BUNGEE STRAP OVER THE CARGO AND AROUND THE RACK UNTIL IT IS TAUT.
4. SECURE THE OTHER HOOK OF THE BUNGEE STRAP INTO THE OTHER BUNGEE ATTACHMENT LOOP.
IMPORTANT: THE BUNGEE STRAP SHOULD AWAYS BE SNUG OVER YOUR CARGO. DEPENDING ON THE SIZE OF YOUR CARGO
AND THE LENGTH OF THE BUNGEE STRAP, IT MAY BE NECESSARY TO WRAP THE STRAP UNDER THE RACK AND OVER YOUR
CARGO BEFORE SECURING THE 2ND HOOK IN A BUNGEE ATTACHMENT LOOP.
5. CHECK THAT THE BUNGEE STRAP AND YOUR CARGO ARE SECURE.
FOR SAFETY AND SECURITY:
· ALWAYS SECURE CARGO TO THE RACK WITH A BUNGEE STRAP OR DEDICATED RACKIT CARGO ACCESSORY. NEVER RIDE
WITH UNSECURED CARGO.
· LIMIT CARRYING CONTENTS ON THE RACK TO 25 LB.
· ENSURE THAT THE TOTAL CARRYING WEIGHT (RIDER PLUS CARGO) DOES NOT EXCEED 300 LB.
· DO NOT OVERFLOW THE RACK OR ANY CARGO ACCESSORIES.
· ALWAYS ENSURE THAT NO PARTS OF THE CARGO OR ANY RACKIT CARGO ACCESSORY FEATURES (STRAPS, BUCKLES,
ETC.) ARE IN THE WAY OF WHEEL, BRAKE, PEDAL, CHAIN OR OTHER BIKE MOVEMENT OR MECHANISMS.
IMPORTANT:
· THE ADDITION OF CARGO WITH SIGNIFICANT WEIGHT MAY AFFECT THE PERFORMANCE OF YOUR E-BIKE. FOR MORE
DETAILS ON CONDITIONS THAT CAN AFFECT PERFORMANCE, SEE SECTION 4.7
· NEVER LEAVE CARGO OR YOUR RACKIT COMPANION ACCESSORY UNATTENDED ON THE E-BIKE.
To Next Page
Loading...
