2.5 Tire Pressure & Inlation
BEFORE YOUR FIRST RIDE, YOU WILL NEED TO ADD
AIR TO YOUR TIRES TO BRING THEM TO WITHIN THE
RECOMMENDED PRESSURE OF 36 43 PSI POUNDS PER
SQUARE INCH. USE A GAUGE TO CHECK THAT THE TIRE
PRESSURE FALLS WITHIN THIS RANGE PRIOR TO
EVERY RIDE.
TO ADD AIR:
1. REMOVE THE DUST CAP FROM THE TIRE VALVE ON ONE
WHEEL BY TWISTING IT COUNTERCLOCKWISE. SET
ASIDE.
2. FOLLOW THE MANUFACTURER’S INSTRUCTIONS ON
YOUR AIR PUMP TO INSERT AIR INTO THE TIRE. CHECK
PERIODICALLY WITH A GAUGE AND CONTINUE ADDING
AIR UNTIL YOU REACH 36 43 PSI.
3. REMOVE THE AIR PUMP FROM THE VALVE AND REPLACE
THE DUST CAP BY TWISTING IT CLOCKWISE ONTO THE
VALVE.
4. REPEAT WITH THE OTHER TIRE.
IMPORTANT: ONLY USE A MANUAL AIR PUMP TO INFLATE
THE TIRES ON YOUR HORIZON. NEVER USE AN AIR
COMPRESSOR; DOING SO MAY CAUSE THE TIRE
TUBES TO POP.
TIRE VALVE
DUST CAP
To Next Page
Loading...
Need help?
General
