Jetson Ora Pro - Installation Instructions; Starting Notes; Helmet Safety

2.2 Helmet Safety
11
2.1 Starting Notes
2.
INSTALLATION
INSTRUCTIONS.
*WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID
CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. CLOSED-TOE,
FLAT SHOES ARE RECOMMENDED. WEAR AN ASTM F1492 APPROVED HELMET AND
PROTECTIVE GEAR TO PREVENT INJURY IN THE EVENT OF AN ACCIDENT.
A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES.
IMPROPER POSITIONING:
THE FOREHEAD IS EXPOSED.
A FALL COULD RESULT IN
SERIOUS INJURY.
PROPER POSITIONING:
THE FOREHEAD IS
COVERED
BY THE HELMET.
• KICK OFF YOUR ADVENTURE RIGHT. PRIOR TO USE OF THIS PRODUCT, CAREFULLY
READ THE ENTIRE USER MANUAL, INCLUDING SAFETY WARNINGS. MAKE SURE YOU
UNDERSTAND, ACCEPT, AND ADHERE TO ALL:
· MANUFACTURER’S RECOMMENDATIONS.
· SAFETY INSTRUCTIONS AND WARNINGS.
· LOCAL RIDING AND OPERATIONAL LAWS AND ORDINANCES.
• TAKE CARE WHEN UNBOXING, REMOVING ALL PACKAGING MATERIALS, AND
POSITIONING THE SCOOTER FOR ASSEMBLY.
• THE DIRECTIONS GIVEN IN THIS MANUAL—RIGHT, LEFT, FRONT/FORWARD, AND
REAR/BACK—ARE ORIENTED AS THE RIDER WOULD SEE THEM WHEN STANDING
ON THE SCOOTER. THE “RIGHT SIDE” OF THE SCOOTER, FOR EXAMPLE, IS THE SIDE
WHERE THE RIDER’S RIGHT HAND WILL BE.