Jetson Ora Pro - Checking Battery Charge Level; Using the Kickstand

22
3.6 Using the Kickstand
KICKSTAND
IMPORTANT: ALWAYS RAISE THE KICKSTAND
BEFORE RIDING.
TO USE THE KICKSTAND: PIVOT IT DOWN AND GENTLY TILT
YOUR SCOOTER ONTO IT TO STAND.
TO RAISE THE KICKSTAND: PIVOT IT BACK UP.
YOU CAN KEEP TABS ON YOUR BATTERY’S CHARGE
BY LOOKING AT THE BATTERY CHARGE ICON ON
THE LCD SCREEN.
3.5 Checking Battery Charge Level
BATTERY
CHARGE ICON
80% - 100%
50% - 65%
20% - 35%
65% - 80%
35% - 50%
0% - 20%
Charge your Jetson NOW!
*APPROXIMATION ONLY. MAY VARY BASED ON USE.
IMPORTANT: WHEN THE BATTERY CHARGE DEPLETES
TO 0%, THE SCOOTER WILL POWER OFF. CHARGE THE
SCOOTER TO FULL POWER (SECTION 2.5) PRIOR TO
YOUR NEXT RIDE.
APPROXIMATE REMAINING
CHARGE PERCENTAGE*