Jetson Ora Pro - Using the Brakes; Using Cruise Control

24
4.4 Using Cruise Control
CRUISE CONTROL LOCKS THE SCOOTER IN AT A CERTAIN
PACE. ONCE YOU ACTIVATE CRUISE CONTROL, THE MOTOR
WILL DO THE WORK TO KEEP THE PACE—NO THROTTLE
REQUIRED.
TO ACTIVATE CRUISE CONTROL WHILE RIDING:
1. USE THE ACCELERATION THROTTLE TO REACH AND
MAINTAIN YOUR DESIRED SPEED FOR 6 SECONDS.
2. WHEN YOU HEAR A BEEP, CRUISE CONTROL IS ON.
3. LET GO OF THE THROTTLE AND ENJOY THE RIDE.
TO DEACTIVATE CRUISE CONTROL AFTER IT
HAS ENGAGED:
GENTLY PUSH DOWN ON THE E-BRAKE OR
ACCELERATION THROTTLE.
THIS SCOOTER HAS BOTH A REAR FOOT BRAKE AND AN
E-BRAKE ON THE HANDLEBAR.
• PRESS DOWN GENTLY ON
THE REAR FOOT BRAKE WITH
THE REAR RIDING FOOT TO
SLOW DOWN.
• APPLY MORE PRESSURE TO
COME TO A COMPLETE STOP.
Rear Foot Brake
E-Brake
• PUSH DOWN ON THE E-BRAKE
GENTLY TO SLOW DOWN.
• PUSH MORE FORCEFULLY TO
COME TO A COMPLETE STOP.
4.3 Using the Brakes
IMPORTANT: TO AVOID ABRUPT MOVEMENTS, TRY TO
ENGAGE THE E-BRAKE GRADUALLY.
RELEASE THE ACCELERATION THROTTLE WHEN
ENGAGING ONE OF THE BRAKES.
REAR FOOT
BRAKE
E-BRAKE