12
WHEN TO UNFOLD: FOR RIDING AND ASSEMBLY*
WHEN TO FOLD: FOR STORAGE AND TRANSPORT
2.3 Unfolding & Folding the Scooter
1. PROP THE SCOOTER UPRIGHT ON THE
KICKSTAND (SEE SECTION 3.6).
2. PUSH THE REAR FENDER DOWN TO RELEASE
THE FOLDING HOOK.
Unfolding
3. PULL THE FOLDING LATCH FULLY OPEN.
4. GENTLY RAISE THE HANDLEBAR UNTIL THE STEM IS FULLY UPRIGHT ON THE
STEM BASE.
IMPORTANT: DO NOT LIFT THE SCOOTER BY THE HANDLEBAR.
TO TRANSPORT IT, SECURE IT IN THE FOLDED POSITION AND
CARRY IT BY THE STEM.
REAR FENDER
FOLDING
HOOK
HANDLEBAR
STEM
STEM BASE
*WHEN UNFOLDING FOR ASSEMBLY, THE HANDLEBAR WILL NOT YET BE ATTACHED.
FOLDING
LATCH
To Next Page
Loading...
