Jetson Ora Pro - Charging the Battery

18
2.5 Charging the Battery
CHARGING PORT
WITH COVER
FULLY CHARGE THE BATTERY PRIOR TO FIRST USE.
1. CONNECT THE CHARGING CABLE WITH THE
CHARGER.
2. PULL OPEN THE CHARGING PORT COVER ON YOUR
SCOOTER.
3. PLUG THE CHARGING CABLE INTO THE WALL,
AND THEN PLUG THE CHARGER CORD INTO THE
CHARGING PORT ON YOUR PRODUCT.
4. WHEN THE INDICATOR LIGHT ON THE CHARGER
CHANGES FROM RED TO GREEN, YOUR BATTERY
HAS REACHED FULL CHARGE. REMOVE THE
CHARGER CORD FROM THE CHARGING PORT AND
UNPLUG THE CABLE FROM THE WALL OUTLET.
5. CLOSE THE CHARGING PORT COVER.
NOTE: It can take approximately 4 hours to bring the battery to full charge.*