Jetson Warren - Page 22

20
2. PIVOT THE FRONT OF THE BIKE TO THE LEFT AND AROUND TOWARDS THE REAR OF THE BIKE UNTIL THE FRONT WHEEL IS
NEXT TO THE REAR WHEEL AND THE MAGNETS ON THE TWO WHEELS ARE ALIGNED.
3. PUSH THE TWO WHEELS TOGETHER SO THAT THE MAGNETS CONNECT, SECURING THE BIKE IN THE FOLDED POSITION.
4. PROP THE BIKE ON THE BIKE STAND TO KEEP IT UPRIGHT WHILE IN THE FOLDED POSITION.
REAR
WHEEL
MAGNET
FRONT
WHEEL
MAGNET
BIKE STAND
4
2
3