Jetson Warren - Charging the Battery

33
2.4 Charging the Battery
 CHARGING
 CHARGING COMPLETE
CHARGING INDICATOR LIGHT ON THE CHARGER:
CHARGING
INDICATOR LIGHT
INFRAME CHARGING PORT
BATTERY
OUTOFFRAME
CHARGING PORT
CHARGING PORT COVER
IT CAN TAKE ABOUT 6 HOURS TO BRING A DEPLETED
BATTERY TO FULL CHARGE.
THE BATTERY CAN BE CHARGED WHEN IT IS SECURED IN THE
FRAME OR REMOVED FROM THE FRAME. SEE PAGE 39 FOR
REMOVAL.
1. CONNECT THE CHARGING CABLE WITH THE CHARGER.
2. PULL OPEN THE CHARGING PORT COVER ON THE BIKE
FRAME, IF CHARGING THE BATTERY WHILE IT'S IN
THE FRAME.
3. PLUG THE CHARGING CABLE INTO THE WALL, AND
THEN PLUG THE CHARGER INTO THE CHARGING PORT.
4. WHEN THE INDICATOR LIGHT ON THE CHARGER TURNS
FROM RED TO GREEN, YOUR BATTERY HAS REACHED
FULL CHARGE. REMOVE THE CHARGER FROM THE
CHARGING PORT AND UNPLUG THE CABLE FROM THE
WALL OUTLET.
5. CLOSE THE CHARGING PORT COVER, IF CHARGING THE
BATTERY WHILE IT'S IN THE FRAME.