LATCH
HANDLEBAR CLAMP
HANDBRAKE
*SIDE VIEW
2.2 Adjusting Handlebar Rotation
THE HANDLEBAR CAN BE ROTATED SLIGHTLY FORWARD OR BACKWARDS SO THAT ALL OF THE FEATURES AND FUNCTIONS ON IT
ARE IDEALLY POSITIONED FOR THE RIDER. THE HANDBRAKES, ESPECIALLY, SHOULD BE IN A POSITION THAT MAKES THEM EASY
FOR THE RIDER TO GRIP.
TO ROTATE THE HANDLEBAR:
1. PULL UP THE LATCH ON THE HANDLEBAR CLAMP SO THAT IT IS IN THE OPEN UNLATCHED POSITION.
TROUBLESHOOTING: IF YOU CANNOT OPEN OR CLOSE THE LATCH, THE KNOB MAY BE TOO TIGHT. LOOSEN THE KNOB BY
TURNING IT COUNTERCLOCKWISE FOR ½ ROTATION AT A TIME UNTIL YOU CAN UTILIZE THE LATCH. CLOSE THE CLAMP LATCH.
KNOB
To Next Page
Loading...
