2. ROTATE THE HANDLEBAR FORWARD OR BACKWARD TO REPOSITION IT.
3. WHILE HOLDING THE HANDLEBAR IN THE NEW POSITION WITH ONE HAND, USE THE OTHER HAND TO PUSH THE LATCH
DOWN AND BACK INTO THE CLOSED LATCHED POSITION.
IMPORTANT: IF THE HANDLEBAR DOES NOT STAY SECURE WITH THE CLAMP CLOSED AROUND IT, YOU NEED TO TIGHTEN THE
CLAMP. FIRST, PULL THE CLAMP LATCH OPEN. THEN, TIGHTEN THE KNOB BY TURNING IT CLOCKWISE FOR A FEW ROTATIONS,
THEN CLOSE THE CLAMP LATCH.
3
HANDLEBAR
2
LATCH
KNOB
*SIDE VIEW
To Next Page
Loading...
