TO REINSERT THE BATTERY:
1. SLOWLY PUSH THE BATTERY INTO THE BATTERY COMPARTMENT, ENSURING THAT THE BACK OF THE BATTERY LINES UP
WITH THE PLUGS AT THE BACK OF THE BATTERY COMPARTMENT.
2. INSERT ONE KEY IN THE KEYHOLE.
• TO SET THE HOME POSITION, IN WHICH THE BATTERY IS LOCKED BUT YOU CAN REMOVE THE KEY, TURN THE KEY
CLOCKWISE 90 DEGREES SEE PAGE 40. REMOVE THE KEY FROM THE HEY HOLE AND CHECK THAT THE BATTERY IS
SECURED INSIDE THE FRAME.
• TO SET THE LOCKED POSITION, IN WHICH BOTH THE BATTERY AND KEY ARE SECURED, TURN THE KEY CLOCKWISE PAST
THE HOME POSITION ANOTHER 45 DEGREES. CHECK THAT THE BATTERY IS SECURED INSIDE THE FRAME AND THE KEY IS
SECURED IN THE KEYHOLE.
IMPORTANT: ALWAYS LOCK THE BATTERY INTO THE FRAME. DO NOT POWER ON THE BIKE OR RIDE IT WITHOUT THE
BATTERY LOCKED INTO PLACE.
IMPORTANT: TO AVOID DAMAGING THE BATTERY, DO NOT INSERT IT INTO THE FRAME TOO QUICKLY OR WITH
TOO MUCH FORCE.
To Next Page
Loading...
