www.JFY-tech.com
4
touch the heatsink at the back of the solar inverter or nearby surfaces while
Inverter is operating. By the way, keep it away from any flammable objects.
This version of JSI inverters shall be used with panels connected in a “floating”
way, i.e. with positive and negative terminal not connected to the ground.
The equipment is provided with several labels, some of them with a yellow
background, which are related to safety issues.
Make sure to read the labels and fully understand them before installing the
equipment.
The symbols are:
Equipment grounding conductor (Main grounding protective
earth, PE)
Alternate Current (AC) value
Direct Current (DC) value
Phase
Grounding (Earth)
To Next Page
Loading...