S erial to Ethernet module USR-TCP232-T24 series http://en.usr.cn
Jinan USR IOT Technology Limited Page 46 of 53 tec@usr.cn
4 . Setup as the follow pictures, you need to notice COM port, bond rate and work mode of PC, then click
Activate .
5 . After Activate click, a Virtual COM port COM2 , will be created, COM2 will receive data from TCP IP
socket, and send data to COM2 will convert to TCPIP socket data to remote Equipment .
If create failed, please notice to see error notice and log, when use Virtual COM Port, you should close
other software who use the same TCPIP port.
The success picture as follow:
To Next Page
Loading...