SECTION 2 - PREPARATION AND INSPECTION
3121740 2-3
Table 2-1. Inspection and Maintenance Table
TYPE FREQUENCY
PRIMARY
RESPONSIBILITY
SERVICE
QUALIFICATION
REFERENCE
Pre-Start Inspection Before using each day; or
whenever there’s an Operator
change.
User or Operator User or Operator Operator and Safety
Manual
Pre-Delivery
Inspection
(See Note)
Before each sale, lease, or
rental delivery.
Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Frequent
Inspection
In service for 3 months or 150
hours, whichever comes first;
or;
Out of service for a period of
more than 3 months; or
Purchased used.
Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Annual Machine Inspec-
tion
Annually, no later than 13
months from the date of prior
inspection.
Owner, Dealer, or User Factory Trained Service Technician
(Recommended)
Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Preventative
Maintenance
At intervals as specified in the
Service and Maintenance Man-
ual.
Owner, Dealer, or User Qualified JLG Mechanic Service and Maintenance Man-
ual
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
To Next Page
