EasyManua.ls Logo

JNGE Power JND-X Series - Safe Instructions; Safe Marks; Safety Notices

JNGE Power JND-X Series
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Anhui JNGE Power Co,. Ltd
Address No.99 Yonghe Road, High-Tech Zone, Hefei City Anhui Province, China Mainland
Tel0551-65372576 http://www.hfjnge.com
- 2 -
One Safe Instructions
1.1 Safe Marks
Safe Marks
Implication
Danger
If ignoring safety warning, it will lead to serious accident
Warning
If ignoring safety warning, there is a risk of serious injury accident,
serious damage to equipment
Notice
If ignoring safety warning, there is a risk of moderate equipment
damage or partial business interruption
State
It means the content is additional information
For electrical and electronic equipment, safety involves the whole process of
installation, commissioning, operation and maintenance.So improper use or improper
operation will endanger the life and personal safety of operators or third parties as well as
the safety of equipment.In order to avoid casualties and damage to the equipment, the
operation and maintenance should strictly follow all the following safety information tips,
such as danger, warning and attention.
1.2 Safe Notice
Warning !
JND-X solar controller: all installation operations must be performed by professional
techniciansThe professional technical personnel must go through the special training,
read the manual completely and master the operation related safety matters.
The company shall not be liable for any injury caused by non-professional installation
operation.
Failure to install and operate the controller according to the instructions in this
manual will not be covered by our warranty.
Before Installation
Attention !
When getting product
check whether the JND-X controller is damaged during
transportation . If you find any problem, please contact the company or the transportation
company immediately.
During Installation
Before install JND-X
Make sure the jnd-x controller is not electrically connected and
energized.

Related product manuals