Jntech JNP11KH-V5 - Basic Information

59
Ivout
Inverter output V phase current (A).
Iwout
Inverter output W phase current (A).
Temp
Inverter radiator’s temperature(℃ ).
ErrCode
Inverter current fault mode.
StopCode
Stop code, can check the reason of inverter shut down most
recently.
S-Mode
Start and stop mode.
D-Mode
Protection mode against well dry out.
OF-F
Water overflow alarm function optional in Solar pump system
storage device.
Run/Stop
run /stop status.
GPRS
The connecting situation of inverter ’s GPRS.
ESC
Return to the previous menu.
8.3.1.2 Basic Information
InverterInfo, shows basic information of inverter, please refer to the figure
below.
Figure 8-4 Basic Information Details
Inverter Info
Explain
LCD-Ver
Version information of LCD program.
DSP-Ver
Version information of DSP program.
SiteNum
Site number of network node of inverter, when
communicate with RS485. Default value is 10. If
modifiable, please refer to“8.3.4.4Site Number Set”.
SN
Series number of inverter.
Ty
Type of inverter.
ESC
Return to the previous menu