Joerns Bari10A - Features and Specifications

5
Joerns Bariatric Beds
Model Bari10A
© 2015 Joerns Healthcare • 6110089 RevF • 15-2235
Classifications
ANSI/AAMI ES 60601-1 : 2005, ed.3
CAN/CSA-C22.2 No. 60601-1 (2008), ed.3
IEC 60601-1 : 2005 + CORR. 1 (2006) + CORR.2
(2007), ed.3
IEC 60601-2-52, Edition 1.0, 2009-12
Environmental Conditions
Operating Conditions
Ambient Temperature: +20°C to +30°C
Relative Humidity: 10% to 95% Non-Condensing
Atmospheric Pressure: 700 hPa to 1060 hPa
Protected Against Splashing Water IPX4
Storage and Shipping Conditions
Ambient Temperature: -30°C to +50°C Relative
Relative Humidity: 10% to 95% Non-Condensing
Atmospheric Pressure: 500 hPa to 1060 hPa
Accessories And Options
Joerns Therapeutic Support Surfaces, IV Rod, Floor
Mat, Patient Helper, Steer Wheel, Dual Casters
Bed Identication Numbers
When ordering parts or when contacting our Customer
Care Department, please include the bed’s model and
serial numbers, found on the identication label. The
identication label is located on bed frame under the
sleep deck foot section.
Features and Specifications
Joerns
®
Bari10A Standard Features
• Fully adjustable mattress support platform with
independent back and knee movement, up/
down adjustments, Trendelenburg and Reverse
Trendelenburg positioning and Comfort Chair
positioning
• 36" wide mattress support platform sections easily
expand to 48" wide
• Mattress support platform expands from 80" to
88" length
• Height adjustable from 18¾" to 33¾"
• Side Rails on head and foot sections fold down for
easy resident/patient access
• Pendant control for all bed functions
• Staff Control with lockouts and backlighting
• Emergency Manual Release for mattress support
platform
• Emergency Battery Backup system
• Integrated Scale System for resident/patient weight
monitoring
• Quiet DC Motors
• Welded steel tubular frame
• Pan-style mattress support platform
• Wide stable base
• SoftTone frame color
• Heavy-duty casters
• Bed and back section angle indicators
• Drainage bag loops
• IV Sockets (½" and ¾")
Electrical Specifications
Controller
Power: 115 VAC North American
Frequency: 60 Hz
Current Rating: 5.8 Amps
Classication: Class 1, Type B
Mode of Operation: 10% Maximum duty cycle
Circuit Protection: Auto reset current sensors
Note: Actuators operate on a 24V DC system with an
integral battery backup.
Mechanical Specifications
Description: Dimensions:
Overall Bed ................................Minimum 39"x 90"
Maximum 52"x 98"
Mattress Support Platform .........Minimum 36"x 80"
Maximum 48"x 88"
Bed Frame Weight ...................................... 700 lbs
Maximum Back Section Angle ......65° to horizontal
Maximum Knee Section Angle .....35° to horizontal
Maximum Knee to Leg Angle............................ 45°
Maximum Height Mattress
Support Surface...................... 33-3/4" Above Floor
Minimum Height Mattress
Support Surface...................... 18-3/4" Above Floor
Safe Working Load ................................... 1050 lbs