Joerns Bari10A - Scale System

13
Joerns Bariatric Beds
Model Bari10A
© 2015 Joerns Healthcare • 6110089 RevF • 15-2235
Scale System
Bari10A bed may be equipped with Scale System, fully
integrated within foot panel (Figure 20).
Scale System Features (Figure 21)
1. Resident/patient’s weight is displayed on a
16-character dot matrix liquid crystal display with
LED backlighting.
2. Resident/patient’s weight may be viewed in both
pounds and kilograms by pushing Weight
Mode button when weight is displayed. Weight is
displayed with a resolution of 0.1 lb or Kg.
3. Monitor resident/patient’s weight relative to zero
by using Weight Change Mode button to observe
variations in weight.
4. Freeze/Resume mode button provides ability
to add or remove pillows, blankets or ancillary
equipment, without affecting resident/patient’s
displayed weight.
Maximum Weight Capacity
Do not exceed rated safe working load capacity of bed
(1050 pounds).
Scale Accuracy
0.5% of resident/patient weight or 0.5 lb, whichever
is greater, from 250 to 1050 lbs, while bed is in at
position.
Auto Power Down (APD)
Scale System will automatically power down in 60
seconds to conserve battery life and protect resident/
patient personal information.
Averaging
Automatic digital lter samples weight data to
lter motion.
Power Supply
Powered by bed controller with integral battery
backup.
Environmental Conditions
Operating Conditions
Ambient Temperature: +20°C to 30°C
Relative Humidity: 10% to 95% Non-Condensing
Storage and Shipping Conditions
Ambient Temperature: -30°C to +50°C
Relative Humidity: 10% to 95% Non-Condensing
Figure 21
Caution: Steer Wheel function must be disengaged to
obtain an accurate resident/patient weight.
Figure 20