John Bean VPI SYSTEM II - Standard and Optional Accessories; INSTALLATION AND SETUP; Dimensions and Installation Area

Page 6
1.5 STANDARD ACCESSORIES
1 EAC0058D15A Soft Protector ring
2 EAC0058D07A Cup - Pressure
3 EAC0058D08A Disk - Pressure
4 EAA0263G66A Quick Nut
5 EAM0021D90A Standard 40mm Stub Shaft
6 EAM0005D40A Weight - Calibration
7 EAC0060G02A Flange - Cover, Hook
8 EAM0006G01A Pin - Accessory
9 EAA0247G21A Caliper - Rim Width
10 EAM0005D34A Fastening Rod
Figure 2
Figure 3
1.6 OPTIONAL ACCESSORIES
4 PC Cone Kit, p/n EAK0221J60A, contains:
A EAM0003J08A Cone, 85-132 mm / 3.3”-5.2”
B EAM0003J07A Cone, 71-99 mm / 2.8”-3.9”
C EAM0003J06A Cone, 56-84 mm / 2.2”-3.3”
D EAM0003J05A Cone, 43-63 mm / 1.7” - 2.5”
7PC Cone Kit, p/n EAK0221J31A, contains:
A EAM0003J64 Cone 1.70" T0 2.23"
B EAM0003J65 Cone 2.03" T0 3.17"
C EAM0003J66 Cone 2.38" T0 3.51"
D EAM0003J67 Cone 2.74" T0 3.87"
E EAM0003J68 Cone 3.08" T0 4.21"
F EAM0003J69 Cone 3.42" T0 5.40"
G EAM0003J70 Cone 4.21" T0 6.30"
Weight Pliers - 58839
NOT SHOWN:
Unilug adapter kit - pn 110614
Truck cone kit - pn 110612
Motorcycle adaptor kit - pn - EAA0260D80A
Figure 1