Johnson Controls 100 Series Manual

JOHNSON CONTROLS
7
FORM 100.50-SU8
ISSUE DATE:1/28/2016
1
The Series 100 unit is a large tonnage rooftop unit, with
sizes ranging from 50-150 tons. It can be configured to
run as a Constant Volume unit, a Multizone Variable
Air Volume (VAV) unit, Single Zone VAV, or as a Flex-
Sys (underfloor air) unit. There are many different op-
tions that can be added to the machine, which will add
to its complexity.
This start up guide indicates control sequences to pro-
vide proper unit operation. This guide does not include
installation information. Please refer to the proper In-
stallation, Operation, and Maintenance (IOM) manual
for this information.
• 50-65 ton units, Mod F: Form 100.50-NOM5
(1115)
• 70-105 ton units, Mod F: Form 100.50-NOM9
(1115)
• 120-130 ton units, Mod F: Form 100.50-NOM10
(1115)
• 120-150 ton units, Mod G: Form 100.50-NOM11
(1115)
In addition, any system alarms indicated by the User
Interface should be diagnosed as referenced in the ap-
propriate IOM. You can refer to the Fault Description
Table located in the Service section of the IOM.
SECTION 1 - INTRODUCTION

Johnson Controls 100 Series Specifications

General

Brand	Johnson Controls
Model	100 Series
Category	Air Conditioner
Language	English