Johnson Controls CK721-A Upgrade Manual

Factory Field Upgrade Manual CK721-A Version 3.0
24-10025-59 Rev. – 7
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
TERA TERM PRO CONFIGURATION
This section provides instructions on configuring Tera Term Pro. If your configuration
settings currently match the settings required to perform the upgrade, you may skip this
section. The required settings are:
 Connect to serial port: COM1 or COM2 (depending on the COM port you are
using)
 Serial port baud rate: 115200
 Scroll buffer: 10,000 lines
NOTE
Once Tera Term Pro is configured according to the following instructions,
the settings will take effect each time you launch the application.
 To Configure Tera Term Pro:
1. Open Windows Explorer.
2. Access the following directory: C:\Pr
ogram Files\TTERMPRO
3. Delete the TERA
TERM.INI file.
4. Launch Tera Term Pro.
5. On the Tera Term: New connection dialog box, select the Serial ra
dio
button and the COM1 or COM2 port, depending on the COM port you are
using. Click OK.
6. From the menu bar, select Setup>Serial Port.

Johnson Controls CK721-A Specifications

General

Brand	Johnson Controls
Model	CK721-A
Category	Controller
Language	English