Johnson Controls LN-IO -1 Series - Page 23

LN Application Specific, Remote I/O, and Free Programmable Controllers Installation Instructions
23
Outputs
1
Software and jumper configurable
0 to 10 VDC, digital 0 to12 VDC (on/off), PWM, or Floating
PWM output: adjustable period from 2 seconds to 15 minutes
Floating control: requires two consecutive output
minimum pulse on/off: 500 milliseconds
adjustable drive time period
60 mA maximum at 12 VDC (60ºC [140ºF])
Minimum load 200 ohms
Auto reset fuse
60 mA at 60ºC (140ºF)
100 mA at 20ºC (68ºF)
Output Resolution: 10-bit digital/analog converter
Power Supply Output: 15 VDC, maximum 240 mA
Electromagnetic Compatibility CE Emission: EN61000-6-3: 2007 Generic standards for residential, commercial, and
light-industrial environments.
CE Immunity: EN61000-6-1: 2007; Generic standards for residential, commercial, and
light-industrial environments.
Compliance United States: UL Listed: UL916 Energy management equipment
Material
2
: UL94-5VA
Canada: UL Listed: UL916 Energy management equipment
Material
2
: UL94-5VA
1. Floating available when programmed with LN GPI software.
2. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste
Electrical and Electronic Equipment (WEEE) directive.
Table 9: LN-PRG500-2 and LN-PRG510-2 Controllers (Part 1 of 2)
Product Codes LN-PRG500-2 and LN-PRG510-2
Power Requirements Voltage: 24 VAC/DC; +/- 15%, 50/60 Hz, Class 2
Protection: 3.0 A user-replaceable fuse
Typical Consumption: 25 VA all outputs with 20mA load at 12 VDC and 15 VDC output
80mA (4 x 20 mA)
Maximum Consumption: 50 VA
Environmental Operating Temperature: 0 to 70
°C, (32 to 158°F)
Storage Temperature: -20 to 70
°C, (-4 to 158°F)
Relative Humidity: 0 to 90%
General Standard: L
ONMARK Functional Profile: SCC-VAV Controller #8502
Processor: Neuron 3150, 8 bits, 10 MHz
Memory: Nonvolatile Flash 64k (APB application), Nonvolatile Flash 64k (storage)
Media Channel: TP/FT-10; 78 Kbps
Communication: LonTalk protocol
Transceiver: FTX-1
L
ONMARK Interoperability: Version 3.4
Device Class: Multi I/O Module
L
ONMARK Functional Profile: Input Objects: Open-Loop Sensor #1, Output Objects:
Open-Loop Sensor #3
Enclosure Material: ABS type PA-765A
Dimensions (with screws): 7.7 x 4.7 x 2.0 in. (195.6 x 119.4 x 50.8 mm)
Shipping Weight: 1.17 lb (0.53 kg))
Table 8: LN-PRG400-2 and LN-PRG410-2 Programmable Controllers (Part 2 of 2)