Johnson Controls MAHP18B21S - Table 11. Air Flow Data (CFM1)

PMGB0406B rev.1
28
Models
Wired Controller
Indication
(Blower Speed)
External Static Pressure (in. wc.)
0.10 0.20 0.30 0.40 0.50 0.60 0.70
208 Volts
18B
2
High (High) 723 702 666 576 N/A N/A N/A
Low (Medium) 566 543 480 382 N/A N/A N/A
24B
High (High) 990 973 953 924 885 797 713
Low (Medium) 736 723 703 644 606 540 457
30B
High (High) 1228 1192 1134 1078 1023 951 843
Low (Medium) 1023 998 958 915 859 741 677
36B
High (High) 1522 1475 1416 1349 1276 1188 1108
Low (Medium) 1251 1217 1180 1135 1085 1042 968
36C
High (High) 1539 1489 1450 1400 1283 1201 1110
Low (Medium) 1159 1147 1096 1042 994 943 877
48C
High (High) 1686 1643 1583 1507 1441 1357 1062
Low (Medium) 1482 1439 1392 1340 1280 1090 971
48D
High (High) 1988 1931 1853 1775 1695 1606 1391
Low (Medium) 1672 1636 1587 1522 1439 1302 1139
60C
2
High (High) 1851 1813 1757 1680 N/A N/A N/A
Low (Medium) 1718 1687 1631 1562 N/A N/A N/A
60D
2
High (High) 1932 1871 1784 1701 N/A N/A N/A
Low (Medium) 1795 1734 1660 1590 N/A N/A N/A
230 Volts
18B
2
High (High) 806 780 745 687 N/A N/A N/A
Low (Medium) 640 614 563 500 N/A N/A N/A
24B
High (High) 1142 1114 1078 1051 988 931 778
Low (Medium) 854 840 826 800 738 688 605
30B
High (High) 1316 1270 1213 1151 1081 1008 917
Low (Medium) 1139 1104 1059 1005 952 880 769
36B
High (High) 1601 1552 1485 1414 1337 1258 1178
Low (Medium) 1385 1352 1302 1252 1193 1106 1057
36C
High (High) 1671 1636 1581 1513 1439 1330 1210
Low (Medium) 1326 1310 1280 1238 1162 1081 994
48C
High (High) 1775 1727 1668 1596 1513 1431 1190
Low (Medium) 1591 1551 1500 1447 1380 1312 1059
48D
High (High) 2150 2069 1988 1894 1812 1690 1481
Low (Medium) 1878 1812 1752 1677 1604 1497 1258
60C
2
High (High) 1931 1889 1808 1739 N/A N/A N/A
Low (Medium) 1845 1798 1731 1659 N/A N/A N/A
60D
2
High (High) 2040 1969 1885 1779 N/A N/A N/A
Low (Medium) 1917 1861 1779 1694 N/A N/A N/A
1. Air handler units have been tested to UL 1995 / CSA 22.2 standards up to 0.30" wc external static pres-
sure. Dry coil conditions only, tested without ¿ lters. For optimal performance, external static pressures of
0.2" to 0.5" are recommended. Applications above 0.5" are not recommended.
2. Model 18B, 60C, and 60D air handlers must be used within external static pressure of 0.4".
Table 11. Air Flow Data (CFM
1
)
(Ins)DX-Kit4e-rev1.inddC-28
(Ins)DX-Kit4e-rev1.inddC-28
2016/11/2515:32:47
2016/11/2515:32:47