Johnson Controls MAHP18B21S - Figure 18. Mounting Valve Box; Figure 19. Details of Mounting Hole

PMGB0406B rev.1
45
Mount the expansion valve box as shown in the following ¿ gure.
bc da
Figure 18. Mounting Valve Box
NOTE
• In case of installation positions “c” and “d”, make sure to insulate the copper pipes inlet on the
expansion valve box cover to avoid any liquid ¿ ltration and accumulation.
• Installation position "b" is prohibited.
1
/ 4
(7)
(7)
R
1
/ 8
(2.5)
(2.5)
R
3
/
16
16
(5.5)
(5.5)
Details of Mounting Holes
19.3 Mounting Expansion Valve Box
Figure 19. Details of Mounting Hole
(Ins)DX-Kit4e-rev1.indd45
(Ins)DX-Kit4e-rev1.indd45
2016/11/2515:32:54
2016/11/2515:32:54