PMGB0406B rev.1
41
Item Purpose
Expansion Valve Cable
For connection between TB2 terminal no. 1 to 5 in the control box and TB3
terminal no.1 to 5 in the expansion valve box. AWG20 recommended.
Wired Controller
(CIW01)
To control the air handler.
Wired Controller Cable For connection to wired controller.
H-Link Cable For connection to outdoor unit.
Conduit As required to follow local code.
Mounting Screws
(Qty.4)
Use to mount Expansion Valve Box (not included with DX-kit)
The controller and branch piping are optional accessories that are not included
with this product. If necessary, please contact your contractor.
17.5 Field-Supplied Items
17.6 Necessary
Tools and Instrument List for Installation
NOTE:
Use tools and measuring instruments (vacuum pump, gas hose, charging
cylinder, manifold gauge) exclusively for refrigerant R410A.
No. Tool No. Tool
1 Cordless Drill 12 Flare Kit
2 Handsaw 13 Torque Wrench
3 Phillips Screwdriver 14 Charging Cylinder
4 Vacuum Pump 15 Manifold Gauge
5 Refrigerant Gas Hose 16 Wire Cutter
6 Megohmmeter 17 Gas Leak Detector
7 Copper Pipe Bender 18 Level
8 Manual Water Pump 19
Crimper for Solderless
Terminals
9 Pipe Cutter 20 Hoist (for Indoor Unit)
10 Brazing Kit 21 Ammeter
11 Hex Wrench 22 Voltage Meter
(Ins)DX-Kit4e-rev1.indd41
(Ins)DX-Kit4e-rev1.indd41
2016/11/2515:32:52
To Next Page
Loading...