!
CAUTION
Cautions remind you that certain actions, if not performed exactly as
stated, can cause damage to equipment, security problems, or cause the
system to operate incorrectly due to errors in system setup or
programming.
WA RNIN G
Warnings indicate that the possibility of personal injury exists if an
action or actions are not performed exactly as stated.
Enterprise Configuration Introduction
24-10515-21 Rev. – 1-3
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
ABOUT THE P2000 ENTERPRISE CONFIGURATION
To implement the P2000 Enterprise Configuration, P2000 utilizes MS SQL Server's
Database Replication.
Data replication for the P2000 Enterprise Configuration i
s implemented with a Publisher and
Distributor together on one P2000 Central Site, and multiple Subscribers on P2000 Regional
Sites.
In the P2000 Enterprise Configuration, one P200
0 site becomes the P2000 Central Site, also
called “central site” or “central server” throughout this manual.
All other P2000 systems within the ente
rprise become P2000 Regional Sites, also called
“regional sites” or “regional servers” throughout this manual.
Each regional site synchronizes its data with the central site. It receives data updates
from the
central site and/or regional sites.
In order for the MS SQL Server Database Replication to operate correctly
, the central and
regional sites need to be properly configured. This manual contains information necessary to
perform P2000 Enterprise Configuration.
NOTE
It is strongly recommended that all P2000 servers in the P2000 Enterprise
Configuration system use the same version of the Microsoft SQL Server.
To Next Page
Loading...
