Johnson Controls P2000 - Live System Upgrade to Enterprise Configuration Without Additional Hardware

Merging Data Between Sites Enterprise Configuration
3-12 24-10515-21 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
Live System Upgrade to Enterprise Configuration Without
Additional Hardware
 To upgrade a regional site to become a part of P2000 Enterprise
Configuration:
1. Backup the Pegasys and BadgeImages databases
on the regional server using
P2000 backup utility:
 From the P2000 Main menu, select System>Database Maintenance.
Enter password if prompted and click OK. The Database Maintenance
window appears.
 Depending on your current setup, select Backup Data Append or
Backup Data Overwrite to backup the Pegasys database; click
Perform.
NOTE
Backup device needs to be configured prior to performing backup. Refer to
the P2000 Software User Manual for details.
 Click Ye s to confirm that you want to backup the data (this action cannot
be undone). The P2000 backup utility will begin the backup and will exit
when the procedure is completed.
 Depending on your current setup, select Backup Images Append or
Backup Images Overwrite. Click Perform to backup the P2000
BadgeImages database; click Perform.
 Click Ye s to confirm that you want to backup the data (this action cannot
be undone). The P2000 backup utility will begin the backup and will exit
when the procedure is completed.
 Click Exit to close the Database Maintenance window.